Proud Partner of the Western Force
The Selby Street Office Development consisted of a 5-story building which adjoins an existing 7 story building on the same lot. The building includes over 6100m2 of office space, 6000m2 of car parking, a café, changerooms and amenities.
The floor plates were constructed using bubbledeck which surrounded a central double lift and stair core which was constructed using AFS walling. The floors were supported by insitu concrete columns and the roof was constructed from structural steelwork with a fire rated ceiling under.
PS Structures were responsible for the design and construction of the external curtain walling system. The curtain wall consisted of double-glazed panels and 3mm aluminium sections. Each panel was approximately 1500mm wide by 5000mm high and were installed using both the tower crane and on-slab spider cranes.
During the project, PS Structures were required to maintain access to the existing multistory car park, which resulted in the access for construction was only available to one side of the building. A 7m wide full height gantry was constructed over the northern driveway to provide a protected access-way to the existing car park.
The project was successfully completed within the 54-week contract time frame. This was a result of achieving key milestone dates for completion of the structure and commencement of the curtain wall installation.
The building was complimented by 8m high aluminium ultra core clad A-frame support structures and significant landscaping works. All works were completed to a high level of quality and to the complete satisfaction of the client and architect.
CALLON SELECT PTY LTD
MEYER SHIRCORE & ASSOCIATES